art. 024/XX

GZ4/G5,3/GX5,3/GX6,35/GZ6,35

art. 024/XX
For very low voltage halogen incandescent lamps
/XX Length of the leads in centimetres to be agreed with the customer.

Technical data:
  • Steatite body
  • Nickel double contacts
  • Stainless steel pressing contacts spring
  • Standard connection cable: silicone rubber insulation (Max. T 180°C). Length: cm. 15, section 0,75 mm². Other leads available on request.
  • Nominal voltage: 24V
  • Nominal current: 6A
  • Maximum nominal working temperature: 300°C
  • Impulse withstand category: II
  • Weight: 8 gr.


Remarks:
This lampholder makes possible the use of different lamp caps. However, remember not to use lamps with a smaller pin diameter than the ones used before.

IMQ

Download PDF

art. 024G/XX

GZ4,G5.3,GX5.3,GX6.35,GZ6.35

art. 024G/XX
As art. 024/XX, supplied with silicone tubes for insulation of contacts on the rear side.




Download PDF

art. 0024/XX

GZ4,G5.3,GX5.3,GX6.35,GZ6.35

art. 0024/XX
UL version art. 024/XX, with the same technical details but different marking and lead. Standard connection cable: silicone rubber insulation (Max. T 150°C) length: cm. 15, AWG 18 section. Other leads available on request.


UL Recognized Component Mark

Download PDF

art. 0024/SF

GZ4,G5.3,GX5.3,GX6.35,GZ6.35

art. 0024/SF
UL version with the same characteristics as 024/XX, but without wires. The contacts protrude by 6 mm on the rear side in order to make it possible for the producer of the lighting appliance to carry out the clamping.


UL Recognized Component Mark

Download PDF

art. 024A/XX

GZ4,G5.3,GX5.3,GX6.35,GZ6.35

art. 024A/XX
Lampholder assembled with die-cast aluminium cap (our art. 0210). 10x1 female thread with Tige blocking screw.
Weight: 14 gr.




Download PDF

art. 024AK/XX

GZ4,G5.3,GX5.3,GX6.35,GZ6.35

art. 024AK/XX
Lampholder assembled with die-cast aluminium cap (our art. 0210) and clamping spring for dichroic lamps ∅ 50,8 mm, with cap GX 5,3. 10x1 female thread with Tige blocking screw.
Weight: 16 gr.




Download PDF

art. 024D/XX

GZ4,G5.3,GX5.3,GX6.35,GZ6.35

art. 024D/XX
Lampholder assembled with straight nickel-plated clamping plate.
Weight: 10 gr.
Art. 024DG/XX
Supplied complete with silicone tubes for contact insulation.




Download PDF

art. 024L/XX

GZ4,G5.3,GX5.3,GX6.35,GZ6.35

art. 024L/XX
Lampholder assembled with 90° nickel-plated clamping plate.
Weight: 11 gr.

Art. 024LG/XX
Supplied completed with silicone tubes for contact insulation on the rear side.




Download PDF