art. 043
G9
Technical data:
- Body made of ceramics (steatite) with external thread, diameter 20.8x2 mm
- LCP cover
- Contacts made of stainless steel
- Lamp-holding spring made of chromium-plated steel
- Quick connection clamps for rigid and flexible wires: section 0.5 ÷ 0.75 mm², Ø ext. max 2.2 mm. If the wires are flexible, with terminal tip, maximum diameter 2 mm.
- Fixing of the body with clips (see available accessories)
- Nominal voltage. 250V
- Nominal current: 2A
- Maximum nominal working temperature: 250°C
- Impulse withstand category: III
- Weight: 12 gr
Remarks:
If equipped with cables with double isolation, this lampholder is suitable for Class II devices.
Download PDF
art. 043/XX
G9
/XX length of the leads in centimetres to be defined to be agreed upon with the customer
Technical data:
- As art. 043, but supplied with cables already connected
- Standard connection cables: isolation made of FEP 100, T. Max 180°C, section 0.75 mm² (AWG 20), length: 15 cm, terminals with removed coating 6 mm
- Other types of lead on request
- Weight: 15 gr
Download PDF
art. 043.A/XX
G9
Assembled lampholder with die-cast, nickel-plated connection (our article 042/16). M10x1 female thread
Weight: 21 gr
Download PDF
art. 043.A1/XX
G9
Assembled lampholder with die-cast, nickel-plated connection (our article 042/17). M8x1 female thread.
Weight: 21,5 gr
Download PDF
art. 043.A2/XX
G9
Assembled lampholder with die-cast, nickel-plated connection (our article 042/18). M10x1 male thread.
Weight: 21,5 gr
Download PDF
art. 043.B/XX
G9
Assembled lampholder with LCP connection (our article 042/13). M10x1 female thread.
Weight: 18 g
Download PDF
art. 043.B1/XX
G9
Assembled lampholder with LCP connection (our article 042/19). M8x1 female thread.
Weight: 18gr.
Download PDF
art. 043.L/XX
G9
Assembled lampholder with 90° bracket made of nickel-plated steel (our article 042/15).
Weight: 18,5 gr
Download PDF
art. 043/08
accessorio
art. 043/09
accessorio
art. 042/08
accessorio
Straight spring supporting the lampholder made of nickel-plated steel
Suitable for our lampholders, article nos. 042, 043
1st: fixing of the spring on the support surface
2nd: ″click-on″ fixing of the lampholder on the spring
Weight: 1 gr
Download PDF
art. 043/10
accessorio
art. 043/11
accessorio
